Im one day away from my deadline and my project isnt working!!i realli nid help.I have connected a Cygnal C8051F005 to a farnell lcd.My connections are : LCD pin 7 to 14 to c8051 port 1(p1.6 to p 1.1) and i nid to show the words " Height : " without the quotes.The lcd still cant work after i inputted the program.here is my program.Pls correct my program.The datasheet for the lcd is **broken link removed** reply to alone_againSQ@hotmail.com.I really appreciate any help at all and many thanks to those reading the post.
the lcd still cant work after i changed according to your help,and
data_write(0x48) is supposed to display the lettere "H"..i thought ill start wif something small at least get the lcd to display a letter 1st.however the lcd jus keep jumping..meaning the lcd's 1st row & 3th row(from top to bottom) keep jumping to all 4 rows,all the while displaying full dark characters on each row.
ill elaborate the lcd screen -> XXXXXXXXXX
XXXXXXXXXX
Then in will changed to -> XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
the lcd still cant work after i changed according to your help,and
data_write(0x48) is supposed to display the lettere "H"..i thought ill start wif something small at least get the lcd to display a letter 1st.however the lcd jus keep jumping..meaning the lcd's 1st row & 3th row(from top to bottom) keep jumping to all 4 rows,all the while displaying full dark characters on each row.
ill elaborate the lcd screen -> XXXXXXXXXX
XXXXXXXXXX
Then in will changed to -> XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX