Hi,all of you Ihave question about potentiometer data send from controller to controller thank you new Adil sadiq

be80be said:

Is this what you want ddrb=0xff; that makes it all inputs

Click to expand...

be80be said:

Sorry forget the above its 1 for output

Click to expand...

be80be said:

But i think i figured it out you have this will not work ddrb=0xff;

Click to expand...

be80be said:

This code is not going to send anything serial out

Code:

void main() {
ddrd=0x00;
portd=0x0e;


Portb=0;
ddrb=0xff;
while (1)
{
if (pind.b1==1 && pind.b2==1&& pind.b3==0&&pind.b6==0)
Portb=0b00001011;
else
Portb=0;
if(pind.b1==1 && pind.b2==0&& pind.b3==0&&pind.b6==0)
portb=0b00000011;
else
portb=0;
if(pind.b1==1&&pind.b2==0 && pind.b3==1&&pind.b6==0)
portb=0b00000010;
else
portb=0;
if (pind.b1==1 && pind.b2==1&&pind.b3==1&&pind.b6==0)
portb=0b00000100;
else
portb=0;
if(pind.b6==1&&pind.b2==1&&pind.b3==0&&pind.b1==0)
portb=0b00011001;
else
portb=0;
if(pind.b6==1&&pind.b2==0&&pind.b3==0&&pind.b1==0)
portb=0b00010001;
else
portb=0;

if(pind.b6==1&&pind.b2==0&&pind.b3==1&&pind.b1==0)
portb=0b00010000;
else
portb=0;
if (pind.b6==1&&pind.b3==1&&pind.b2==1&&pind.b1==0)
portb=0b00010000;
else
portb=0;



}
}

What did you use for simulation

Click to expand...

ahuida_love said:

I use this in smulation proteus 7 isis professional and work but when ai bring it to circut board not work out I thing I do not no all about the chip at90s2313 how it set up run thank you for your patent

Click to expand...