Hi all. I need to build a lighting system and have no clue on how and what to do. Here's the problem parameters:
1) At each of 8 positions on a table there will be three lights (B, S, D).
2) At postion 1 there will also be an on/off swith and a push button.
3) When the system is turned on, lights D1, S2, and B3 need to be lit. (D1 is the the D light in front of postion 1, S2 is the S light in front of postion 2, etc).
4) When the push button is pressed, the lights need to rotate to the next position. IE: D1 goes off and D2 turns on, S2 goes off and S3 turns on, and B3 goes off and B4 turns on.
5) When a light at postion 8 turns off, the corresponding light at position 1 turns on. IE: If D8 goes off, D1 needs to turn on.
6) The system must run off a battery. Nothing bigger then a latern battery is a requirement, and running off standard alkaline batteries is ideal.
7) Try to keep the circuit from killing me if I touch an exposed wire on accident. A small "Learn your lesson?" shock is OK.
Can someone provide me with a diagram for this set up?
Thanks,
Kevin