Powering RPI5 8gb from 5v supply

Stuee123

Member
Hi all.
I have a multi power supply for my arcade machine im making which is 24v, 12v and 5v 6A - Im currently using a power supply for the rpi but want to wire the usbc to this power source. I am worried about the quality of the power and wondering if there is such a pcb that is a power conditioner with usb or usbc socket so i can put in my 5v and it "cleans it up" to the usb port.
Thanks in advance.
 
Sort by date Sort by votes
The Pi has an onboard voltage regulator as the MCU runs at 3.3V or less.

Just some basic filtering with a couple of big caps (100uF or more) and a very low value resistor (0.05 Ohm) or a 5A inductor should be fine, if anything at all.

I've not used a 5 yet, but Pi's have the 5V connections on the header pins as well, you can wire direct instead of via the USB socket.
 
Upvote 0 Downvote
You must log in or register to reply here.

Similar threads

F
  • Question
Connected NC pin of 5V regulator to GND
Replies
8
Views
2K
iggnator
I
B
  • Question
Circut for mixing rca signals from headunit?
Replies
5
Views
1K
Nigel Goodwin
  • Question
Bench Power Supply
2
Replies
20
Views
6K
Tony Stewart
N
  • Question
6V 3W bicycle hub alternator to Phone's 5V charging port
Replies
6
Views
3K
Tony Stewart
W
  • Question
What did I do wrong in copying a circuit from a part?
Replies
12
Views
2K
atferrari
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…