Samsung laser multifunction fixed. Error A1-4111

Status
Not open for further replies.
Thank you for your information.....
My printer is C1860FW and now it doesn't show any more error message....
it was kind of headache me but you save me.... Thanks again
 
Yep. This fix is still valid. I opened mine up and this was the problem and the fix. Thank you so much for the detailed fix!
 
Hi Pommie, signed up and created an account like others here to shout out and say thanks for post along with detailed description and pictures, error gone, problem solved. hoping some cool karma comes your way. Cheers, Steve
 
This fix worked for me also. I was skeptical to say the least, but I'm truly amazed now.

I have no idea why that could cause an error code, as it's just a simple relay latch.

There shouldn't be any way for the system to know it's not working properly, but somehow it does. Resistance in the coil, I suppose.

I used white artist's tape, and put a couple layers so that the actuator plate is not hitting the front stop, and a couple layers underneath so it can't be pulled all the way back against the electromagnet. And much to my amazement it fixed it.

The existing foam was still there but very thin, not much thicker than a sheet of paper so I guess that was the flaw.

Thanks again for everyone who posts on this forum.
 
Add yet another thankful person! Those pictures were extremely helpful. Subscribed to this site since this was so helpful. Carry on the good work, soldier!
 
Here's another beer to Pommie for another C1860 fixed. It was a bit of a pain-in-the-butt since my wife has it in the corner and I had to spin it in place to get the back screws out. I hope I don't have to do this again!
 
Amazing! First post I see on the internet about this problem and it was bang on! My C1860FW had the exact same problem. Many thanks.
 
Thanks !

POur les français : il y a un petit bout de mousse. Il faut qu'il soit en dessous du machin metalique entouré. J'ai pris un tourne vis plat et je l'ai reglissé vers le bas car il était remonté d'où la panne.
 
As there's such a massive feeling of thanks to Pommie for posting this information, perhaps he might like to post his favourite charity?, and people could send any donations they feel the urge to make to them?.
 
Status
Not open for further replies.

Similar threads

S
  • Question
Samsung TV Home Screen Shows Plain White Screen After Software Update
Replies
3
Views
3K
debojitacharjee
D
  • Question
Samsung UN58TU7000 half screen color problem
Replies
2
Views
5K
Serge 125
A
  • Question
fixed TDK Lambda rws600B 24v psu blew up when adjusting voltage
Replies
4
Views
3K
rjenkinsgb
  • Question
The problem of the error light staying on in the dc to ac inverter 500w⁉️
Replies
5
Views
7K
electronium
  • Question
Panasonic KX-TG1031 error code information
Replies
9
Views
2K
rjenkinsgb
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…