can anyone help me design a unit which i can increase or decrease voltage as i want with two probe like things(+ -) which can attach to the pos and neg units on anything i attach it too so i can short circuit the item like blow the fuse or over power it so the intire circuit burns out so it is beyond repair can anyone help i know it would probs invole a pic chip transistors etc
this is what i plan it to be like but i dont know how to get it like this i currently have two 9v batterys + attached to a key switch and LED so i know when its on it then goes to a switch that you twist to allow more power through and goes through a led light thing in a row to tell me where power is in voltage the negative is going out to the wire of the circuit being tested so the postive from the leds and switch go to the postive or negative on the other unit and it test the fuse etc at what power voltage it can take
to test a fuse, all you need is a 3V battery, LED and few inches of wire. Or just an eye if the fuse is in a glass cylinder.
I don't see much point in testing a maximum current for a particular fuse because of two things. First, every fuse has it's current rating written on it, and secondly, if you cross the maximum current by a few mA, you'll blow the fuse...