Hi guys
This is probably a silly question. I'll try anyway, though.
I need to switch an IRF3205 with my ATTiny45. The processor is (of course) on +5V, the transistor is on +10V and so I need a driver between the two.
The thing is that space is an issue, so I was hoping to find a simple DIP4-sized IC or similar. My imaginary chip has PWR, GND, IN and OUT and that's it.
Is there such a thing?
If not, what would you suggest I do to be able to switch the transistor.
Note: The transistor will be used in PWM-mode at low to moderate speed 500Hz-50kHz, I imagine.
Thanks in advance.