kamikaze33
New Member
im looking to make a deadmau5 head for a friend, and i wanted to use an existing circuit from some sound-responsive led speakers.
originally i had intended on hooking the circuit up to a mono-amp & mic, so that the leds would light up to the music at a concert, but i figure with background noise and such, theres not much point.
so i am wondering if it would be possible to just convert the circuit somehow so the leds light up randomly. i dont care in what fashion, i just want them to light up.
the circuit consists of red, green and blue leds as is, so as long as i can get them all to light up in some fashion without having to hook the circuit into an audio source, i dont care.
EDIT: if all else fails i could just use the plug and have it contact the skin somewhere, which is producing some feedback, although it only creates the same alternating pattern of flashing (which in this case results in an alternation of the leds; there are 2 red 2 green and 2 blue/speaker, so it just alternates between 1 RGB and 1 RGB (if that makes sense) producing the same effect, only 'blinking'. i suppose i could switch the led positions to get say 1 green + 2 reds, and 1 green + 2 blues if i have no other options)
originally i had intended on hooking the circuit up to a mono-amp & mic, so that the leds would light up to the music at a concert, but i figure with background noise and such, theres not much point.
so i am wondering if it would be possible to just convert the circuit somehow so the leds light up randomly. i dont care in what fashion, i just want them to light up.
the circuit consists of red, green and blue leds as is, so as long as i can get them all to light up in some fashion without having to hook the circuit into an audio source, i dont care.
EDIT: if all else fails i could just use the plug and have it contact the skin somewhere, which is producing some feedback, although it only creates the same alternating pattern of flashing (which in this case results in an alternation of the leds; there are 2 red 2 green and 2 blue/speaker, so it just alternates between 1 RGB and 1 RGB (if that makes sense) producing the same effect, only 'blinking'. i suppose i could switch the led positions to get say 1 green + 2 reds, and 1 green + 2 blues if i have no other options)
Last edited: