Hi again,
Yes too much deception and nobody does anything about it.
The reason i went to a controlled iron is because of two main factors:
1. The iron temperature can be turned down but not off, so it heats up really fast when needed again. No more leaving the iron on for hours just to use it for a few minutes or so.
2. The controlled iron has the ability to heat up fast. I can start to solder within maybe 20 seconds. With all my other irons it takes at least 90 seconds or more, and this makes a big difference when you have to repeatedly repair little things like clip leads. I would hate when a clip lead alligator clip would break off because that meant to fix it i had to heat up the iron again, which meant waiting for that to heat up, and then only to solder that one little clip back onto the wire.
Another point was that i wanted a hot air tool as well to do some unsoldering and other odd jobs, and possibly solder or unsolder some surface mount parts. The hot air guns alone were almost as much as the entire station was, so i went with the station and got a fast heating iron with the hot air tool, so it worked out pretty well.
The hot air tool is good for other odd jobs too such as gluing something together using hot glue. The glue gun takes a while to heat up, even when i only have to glue one little thing with it that should take a couple seconds. Using the heat gun i can melt a small slice of a glue stick and glue something within about 30 seconds to 1 minute or even less.
It also works for welding some plastics. The other day i had a drop cloth made of plastic that had a rip in it and that did not like to be glued with any regular glue, so i pulled out the hot air tool and literally welded the rip back together. Took about 1 minute or so. I tried glue but that didnt hold.
Yes too much deception and nobody does anything about it.
The reason i went to a controlled iron is because of two main factors:
1. The iron temperature can be turned down but not off, so it heats up really fast when needed again. No more leaving the iron on for hours just to use it for a few minutes or so.
2. The controlled iron has the ability to heat up fast. I can start to solder within maybe 20 seconds. With all my other irons it takes at least 90 seconds or more, and this makes a big difference when you have to repeatedly repair little things like clip leads. I would hate when a clip lead alligator clip would break off because that meant to fix it i had to heat up the iron again, which meant waiting for that to heat up, and then only to solder that one little clip back onto the wire.
Another point was that i wanted a hot air tool as well to do some unsoldering and other odd jobs, and possibly solder or unsolder some surface mount parts. The hot air guns alone were almost as much as the entire station was, so i went with the station and got a fast heating iron with the hot air tool, so it worked out pretty well.
The hot air tool is good for other odd jobs too such as gluing something together using hot glue. The glue gun takes a while to heat up, even when i only have to glue one little thing with it that should take a couple seconds. Using the heat gun i can melt a small slice of a glue stick and glue something within about 30 seconds to 1 minute or even less.
It also works for welding some plastics. The other day i had a drop cloth made of plastic that had a rip in it and that did not like to be glued with any regular glue, so i pulled out the hot air tool and literally welded the rip back together. Took about 1 minute or so. I tried glue but that didnt hold.