mrkhealthcare
New Member
I am using a piezo ceramic disc for a mist generation application similar to humidifier
![mist generation sensor.jpg mist generation sensor.jpg](https://www.electro-tech-online.com/data/attachments/33/33041-e861b0f70d979b39b381bfeb9a882ea3.jpg)
There is a thin perforated steel disc attached to the piezo disc
The specification of the disc are as follows
Dimensions: 18mm diameter
Resonant frequency fr: 133 KHz±2%
Resonant impedance Zm: ≤100 ΩStatic capacitance Cs: 2000pF±15%@1kHz
Voltage Input: 16Vpp
Max Power Input: 10 W
Mist Production: 80cc/Hr *
Test Condition: 23±3 °C 40~70% R.H.
Cs => LCR meter at 1KHz 1Vrms
I want to drive the piezo disc with a 3 volt dc power source
Can someone help me with the design of this circuit
I thank all for their help
![mist generation sensor.jpg mist generation sensor.jpg](https://www.electro-tech-online.com/data/attachments/33/33041-e861b0f70d979b39b381bfeb9a882ea3.jpg)
There is a thin perforated steel disc attached to the piezo disc
The specification of the disc are as follows
Dimensions: 18mm diameter
Resonant frequency fr: 133 KHz±2%
Resonant impedance Zm: ≤100 ΩStatic capacitance Cs: 2000pF±15%@1kHz
Voltage Input: 16Vpp
Max Power Input: 10 W
Mist Production: 80cc/Hr *
Test Condition: 23±3 °C 40~70% R.H.
Cs => LCR meter at 1KHz 1Vrms
I want to drive the piezo disc with a 3 volt dc power source
Can someone help me with the design of this circuit
I thank all for their help