I would like to use 6vdc 50ma to activate a solid state relay. On the internet I found a relay....the specs are listed below. Is 6vdc 50ma is enough electrcity to activate the relay? How much millamps would this relay require at 6vdc?
DC/DC Solid State Relay
Screw terminal with hardware
Photo isolation
Metal mounting base
Control Voltage: 3-32VDC
Type: DC/DC
Contact style: SPST
Contact Voltage: 60 VDC
Contact Current: 2A
Pins: 4
Terminal Type: Solder lead
Size: 1.4"L x 0.3"W x 0.9"H