Hello ,I need to choose an amplifier to power an LO port of two mixers with 17dBm power level at 10GHz without he following datasheets:
for this purpose I need to choose and amplifier with at least P1dB of 21dBm .
one amplifier is VGA (voltage regulated gain amplifier) and the other is a driver type.
What does it mean driver type amplifier does it fit to power the LO ports of my mixers?
mixers:
https://www.custommmic.com/resources/cmd258c4_ver_1.0_1017.pdf
amplifiers:
1. VGA type
http://www.analog.com/media/en/technical-documentation/data-sheets/hmc996.pdf
2.driver type
http://www.analog.com/media/en/technical-documentation/data-sheets/hmc608.pdf
for this purpose I need to choose and amplifier with at least P1dB of 21dBm .
one amplifier is VGA (voltage regulated gain amplifier) and the other is a driver type.
What does it mean driver type amplifier does it fit to power the LO ports of my mixers?
mixers:
MM1-0320HSM-2_GaAs Double-Balanced Mixer
The MM1-0320HSM is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation and spurious performance across a broad bandwidth and in a small form factor. The MM1-0320HSM...https://www.custommmic.com/resources/cmd258c4_ver_1.0_1017.pdf
amplifiers:
1. VGA type
http://www.analog.com/media/en/technical-documentation/data-sheets/hmc996.pdf
2.driver type
http://www.analog.com/media/en/technical-documentation/data-sheets/hmc608.pdf