wish to learn microcontroller....... need your help

Status
Not open for further replies.
misterT said:
Like the man in the video says.. professionals keep their options and mind open Learn them all once you get started!
Click to expand...

yes absolutely.. and his style is also awesome!!!!!

and just in a few hours I'm going to local shop to buy a reasonable (in price) 8051 development board......
 
Hello Ian, I have just purchased the 8051 Development board.

The CD contain software : Keil μvision3 and another I have attached its view in the picture

Now how should I start... and also picked up AT89S52 chip .........

Now please tell me how to start....? it's upto you.... I cant wait more....
 
Without trying to be mean, I did take a look at the picture and in the text below it does say

A Kind Reminder:

Please click readme me button and get yourself familiaized
with the latest features of this software before you
proceed to using it. Thank You!

Now have you done this already ?????
 

There is nothing...
 
Ok.... The supported micro's on the web site doesn't mention them..

One other thing!! I work Monday through Friday so I only check ETO when passing, You'll have to be patent as it could be hours between checks...

What testing stuff is on the dev board... Looks like you have LED's an push buttons!! Here is where to start... Write a program to flash the led's

Have you downloaded MCU 8051 IDE?? https://sourceforge.net/projects/mcu8051ide/ This is much like MPLAB IDE you can test your code before you program...
 
No... then i am downloading it.
Ok.I'm just excited about to learn the micro (sorry about that)...
after dwnlding wht shld I do?
it's a 7mb file... i thnk 2or 3mnt will take time to cmplt the download.
 
You don't have to have it.... It helps with debugging .. I use it all the time..

Have you EVER programmed a chip before??? I may have to do a little tutorial for you to play with..

Once you download and run MCU 8051 IDE ( remember to install and run as administrator in windows7 or vista or you'll have problems )

You can just type in the assembly code and run using the sim... Once it is debugged... Load it onto the real chip using the software that come with the programmer...
 
Have you EVER programmed a chip before??? I may have to do a little tutorial for you to play with..
Click to expand...
no never programmed a chip before.... but yes 27C512 ROM I program manually in breadboard (i dnt think it'll help in the micro)....

( remember to install and run as administrator in windows7 or vista or you'll have problems )
Click to expand...

I have XP. Administrator mode of course..
 
No.. You don't need to buy a book... www.8052.com is all you need

Here's a tutorial for 8051..
 

Attachments

  • 8051_tutorial.pdf
    246.7 KB · Views: 570
ok then I'll print this (the pdf, you attached) out and read them.

I may have to do a little tutorial for you to play with..
Click to expand...

so this the tutorial you are talking about????

lots of study!!
 
Last edited:
No! I'm writing a tutorial for you... This is just a starter.... Light reading and such...
 
ok ..then should I print the pdf which you uploaded ( as im bit little lazy to read in computer)????... if you say.
 
Status
Not open for further replies.

Similar threads

M
  • Question
I'm trying to reprogram this microcontroller
Replies
2
Views
2K
microbeetle
M
T
  • Solved
Can u help me with this counter!!! (PIC18F46K22)
Replies
8
Views
6K
Ian Rogers
C
  • Question
Stepper motor help needed
Replies
0
Views
64
carl25
C
H
  • Question
I need help again
Replies
16
Views
3K
Ian Rogers
H
  • Question
I need urgent help
Replies
12
Views
2K
Ian Rogers
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…